HP 39gs Master Manual Download

Page: 160 / 366

SYMB mode

Test mode

As can be seen in the screen shots right, the bottom half of the screen

shows the roots (if any), the value of the discriminant and the equation in

the form

y=ax

+bx+c

The key labeled

changes the ‘step size’ of the movements on the

screen. Possible values for the increment are 0.5, 1 and 2.

Pressing

SYMB

on the calculator, or the screen key labeled

will

change the emphasis from the graph to the equation in the right hand
half of the screen. Pressing

PLOT

on the calculator, or the key labeled

will change the emphasis from the equation back to the graph.

The alternative to graphical mode is symbolic mode. In

mode the student can change the coefficients

directly and see the changes reflected in the graph.

For example, on the screen shown below, the ‘v’ coefficient is high
lighted and can be changed using the

and

keys. The size of the

changes to ‘h’ and ‘v’ is controlled by the

key, and the same

range of values is available for the values of ‘a’ as in

mode.

You can move from one coefficient to the next by using the

and

keys.

As with the

mode, the equation in

y=ax

+bx+c

form, its roots

and its discriminant are shown on the right half of the screen.

The + and - keys are disabled in

mode, since their effects are

controlled instead by the

and

keys once the highlight is on the ‘a’

coefficient. The

key controls the sign of ‘a’.

The final key is labeled

. This key will present the student with a

series of graphs for which they must supply the equation. The type of graph is governed by the current setting

. For example, if the current setting of

was at

then the test graphs would also

only use the

parameter instead of

and

simultaneously. The setting of

can be changed within

the

screen using the key supplied.

160

Summary of Contents for 39gs















































































































































































































































































































































































Search results

Summary of Contents for 39gs

Reviews:

Related manuals for 39gs

Brands by name

Popular brands

HP 39gs, Master Manual

Search results

Summary of Contents for 39gs

Reviews:

Related manuals for 39gs

Brands by name

Popular brands