Hioki IM3533, Instruction Manual

Page: 36 / 400

1.3 Screen Configuration and Operation
28
This screen is for selecting the measurement parameters to display.
See
"4.1.2 Setting Display Parameters" (p. 47), "Appendix7 Series Equivalent Circuit Mode and Parallel Equivalent Circuit Mode"(p. A11)
1.3.7 Parameter Settings Screen
Procedure
Select parameters.
Parameter Setting Measurement Screen
1 2
Static capacitance in series equivalent circuit
mode (F)
Static capacitance in parallel equivalent circuit
Loss coefficient = tan

Reactance (

)
Susceptance (S)
DC Resistance(

)
Effective resistance in series equivalent circuit
mode ESR = (

)
Effective resistance in parallel equivalent cir-
cuit mode (

)
Conductance (S)
Impedance (

)
Admittance (S)
*Impedance phase angle (
°
) *
Q factor
* The phase angle q is shown based on the impedance Z.
When performing measurements using admittance Y as the reference, the sign of the impedance Z phase angle will be reversed.
Press the key to set.
Inductance in series equivalent circuit mode
(H)
Inductance in parallel equivalent circuit mode
(H)
The fourth parameter key
The third parameter key
The first parameter key
The second parameter key
Temperature (C
°
)
Display no measurement parameter in the
chosen position.
Measurement Screen is
displayed.