Hioki IM3533, Instruction Manual

Page: 336 / 400

12.4 External I/O Settings
328
There are the following setting items for the output timing of the judgment result output signal and the logic of
the trigger signal.
The delay time for the period from the output of the comparator and BIN judgment results until the output of
EOM (LOW) from the EXT I/O can be set on the instrument or by a communication command.
For the setting procedure, refer to the following.
See "Setting the Delay Time from the Output of Comparator and BIN Judgment Results until Output of EOM (LOW) and
Resetting Judgment Results" (p. 134)
LCR Application Disk - Communication Commands (
:IO:OUTPut:DELay
) .
Whether to reset the comparator and BIN judgment results simultaneously with the measurement start signal
can be selected on the instrument or by a communication command.
For the setting procedure, refer to the following.
See "Setting the Delay Time from the Output of Comparator and BIN Judgment Results until Output of EOM (LOW) and
Resetting Judgment Results" (p. 134)
LCR Application Disk - Communication Commands (
:IO:RESult:RESet
)
Whether to enable or disable trigger input from the EXT I/O during measurement (during EOM (HI) output)
can be selected on the instrument or by a communication command.
For the setting procedure, refer to the following.
See ,"Enabling Trigger Input for during Measurement and Setting the Valid Edge of Trigger Input" (p. 136)
LCR Application Disk - Communication Commands ( :IO:TRIGger:ENABle )
Either the rising edge or falling edge can be selected as the valid edge of trigger input from the EXT I/O.
For the setting procedure, refer to the following.
See "Enabling Trigger Input for during Measurement and Setting the Valid Edge of Trigger Input" (p. 136)
LCR Application Disk - Communication Commands (
:IO:TRIGger:EDGe
)
12.4 External I/O Settings
Setting Delay Time from Output of Comparator and BIN Judgment Results
until Output of EOM (LOW)
Setting Reset of Judgment Results
Enabling Trigger Input for during Measurement
Setting Valid Edge of Trigger Input