Hioki IM3533, Instruction Manual

Page: 213 / 400

6.3 Judging with Upper and Lower Limit Values (Comparator Measurement Mode)
205
6
Chapte
r 6
TRANSFORMER Functio
n
3
Setting Upper and Lower Limit Values as (

%) Values Relative to the Off-
set from the Reference Value (Deviation Percentage Mode)
Procedure
1
Press .
Press to select deviation percentage
mode.
2
• In the deviation percentage mode, the calculated
value is displayed as a deviation (

%) from the refer-
ence value.
• The reference value and upperand lower limit values
are set in the same manner as in the percentage mode.
See "Setting the Upper or Lower Limit Value as a
Percentage (%) Relative to a Reference Value
(Percentage Mode)" (p. 203)
• The settings of the reference value and the upper
and lower limit values are common to both the per-
centage mode and deviation percentage mode.
• The

% value is calculated using the following equation:

% =
|reference value|
Calculated value - reference value
×100
TRANSFORMER Measurement Screen
Comparator Condition Setting
Changing the unit (
a/ f/ p/ n/

/ m/ None/ k/ M/ G
)
Step the units up.
Step the units down.
Press and use the numeric keypad to
enter the reference value.
3
Settable range: -9.99999G to 9.99999G
Reference Value Setting
4
Press to confirm the reference value.