Hioki IM3533, Instruction Manual

Page: 345 / 400

14.1 General Specifications
337
14
Chapter 14
S
pecifica
tions
Specifications
Chapter 14
14.1 General Specifications
1.Basic Specifications
Measurement mode (1) LCR mode: Measurement with single condition
(2) ANALYZER mode (IM3533-01 only): Measurement frequency sweep
• No. of measurement points: 2 to 801
• Sweep method: Normal sweep START-STOP
• Display: List display
(3) TRANSFORMER mode: Measurement using a single condition
(4) CONTINUOUS measurement mode: Continuous measurement of saved conditions
• LCR mode .................. Up to 60
• ANALYZER mode ...... Up to 2 (IM3533-01 only)
* Continuous measurement using mixed LCR mode and ANALYZER mode operation is
also supported (IM3533-01 only).
Measurement items (1) LCR mode, ANALYZER mode:
Z (Impedance), Y (Admittance),

(Phase angle), Rs (Equivalent series resistance
(ESR)), Rp (Equivalent parallel resistance), X (Reactance), G (Conductance),
B (Susceptance), Ls (Equivalent series inductance), Lp (Equivalent parallel inductance),
Cs (Equivalent series capacitance), Cp (Equivalent parallel capacitance), Q (Q factor),
D (Loss coefficient tan

, Rdc (DC resistance), T (Temperature)
(2) TRANSFORMER mode:
N (winding ratio), M (mutual inductance),

L (inductance difference)
Display range
Measurement frequency (1) Frequency range
1 mHz to 200 kHz
(2) Setting resolution
0.001 Hz to 99.999 Hz ........ 1 mHz steps
100.00 Hz to 999.99 Hz ...... 10 mHz steps
1.000 kHz to 9.9999 kHz..... 100 mHz steps
10.000 kHz to 99.999 kHz... 1 Hz steps
100.00 kHz to 200.00 kHz... 10 Hz steps
(3) Frequency accuracy
±0.01% of setting or less
Parameters Display range (6 digit)
Z 0.00m to 9.99999G

Y 0.000n to 9.99999GS

±0.000 to 999.999
Rs, Rp, X, Rdc ±0.00m to 9.99999G

G, B ±0.000n to 9.99999GS
Cs, Cp ±0.0000p to 9.99999GF
Ls, Lp, M,

L ±0.00000

to 9.99999GH
D ±0.00000 to 9.99999
Q ±0.00 to 9999.99

% ±0.000 to 999.999%
T -10.0 to +99.9
N 0.00000f to 999.999G