Higen FDA7000 Series, Operation Manual

Page: 84 / 214

3. Parameter setting
3-5
StE-23
DC LINK VOLTAGE
Unit
Vdc Setting range
0.0 ~ 999.9
Manufactured
default
Speed/Torque/
Position control
It displays the DC voltage charged inside the servo drive when the 3-phase main circuit power
supply R, S, T is turned on.
* Allowable Voltage Fluctuation Rate
AC 220V ► DC 240.4V ~ 357.7V
AC 380V ► DC 483.6V ~ 617.9V
AC 440V ► DC 560.0V ~ 780.5V
3.2. Motor and operating device setting[P01-]
P01-01*
Motor ID
Unit
-
Setting range
GEN - 00 ~ 500
Manufactured
default
By capacity
Speed/Torque/
Position control
Set the motor ID to use. P01-02 ~ P01-10 (Except P01-07 and P01-08), the motor parameter,
masked.
Motor ID applicable to FDA7000 series[AC 220V Standard Series]
ID Model ID Model ID Model ID Model ID Model
00 Manual 20 TF05 40 LF03 60 KN03 80 LN03
01 21 TF09 41 LF06 61 KN05 81 LN06
02 22 TF13 42 LF09 62 KN06 82 LN09
03 23 TF20 43 LF12 63 KN07 83 LN12
04 24 TF30 44 LF20 64 KN06A 84 LN12A
05 CJZ5 25 TF44 45 LF30 65 KN11 85 LN20
06 CJ01 26 46 66 KN16 86 LN30
07 27 47 67 KN22 87 LN40
08 CJ02 28 48 CN40 68 KN22A 88 TN110
09 CJ04 29 49 CN50 69 KN35 89 TN150
10 30 KF08 50 CN04A 70 TN05 90
11 CN01 31 KF10 51 CN06 71 TN09 91
12 CN02 32 KF15 52 CN08 72 TN13 92 LN55
13 CN03 33 KF22 53 CN10 73 TN17 93
14 CN04 34 KF35 54 CN09 74 TN20 94
15 CN05 35 KF50 55 CN15 75 TN30 95
16 36 56 CN22 76 TN44 96
17 37 57 CN30 77 97
18 38 58 CN30A 78 TN55 98 KN70
19 39 59 CN50A 79 KN55 99 TN75N