GW Instek PEL-2000B Series, User Manual

Page: 177 / 317

OPERATION
177
Note
*REV, OTP and CPP cannot be cleared using this
method, the Protection Clear function must be used
instead, see page 177.
See pages 58 and 276 to output alarms via the
Go/NoGo output terminal.
The configuration settings only apply to the
current channel.
Protection Clear
Background
When any of the protection circuits have been
tripped, the Protection Clear function can be used
to reset the alarms.
Alarm will be shown on the Mainframe Status
Panel and an alarm tone will sound by default
when any of the protection settings are tripped.
Alarm
05/04/22
16 : 50
On the local load module, the protection setting
that has been tripped will be displayed.
Example: Reverse voltage protection
OCP
OVP
REV
OPP
OTP
CPP