GW Instek PEL-2000B Series, User Manual

Page: 108 / 317

PEL-2000B Series User Manual
108
Frame Link
Frame link connections are used connect up to four slave main
frames to a master main frame. When using frame link connections
it is possible to perform a number of operations in parallel under
the control of the master unit.
DUT
DUT
DUT
DUT
Step Description Details
1. Setup
Connect the mainframes together. Page 53
2. Configure
Configure the Frame CONT to ON
for all mainframes. Page 204
USB
LOAD
FRM
05/04/22
16 : 50
At first both the master and slaves are independent.
FRM (Frame Master) can be seen on the top panel
of the each mainframe. When a mainframe is
connected as a slave unit, the FRM icon will change
to FRS (Frame Slave). The front panel keys are
disabled on slave units when in slave mode (FRS).
Slave mode
FRM FRS
Master/Independent
FRM
3. Program
See the tutorial sections for
programming or channel
configuration. Pages 101, 103