GW Instek PEL-2000B Series, User Manual

Page: 132 / 317

PEL-2000B Series User Manual
132
Configure Configure
Mode
CC
Dynamic
Range
High
Note
Changing the operating mode will only affect the
current (active) channel. Other channels will not be
affected by any changes.
Select CR Range
Background
Constant Resistance mode can run in high and
low range. Range is dependent on the load
module.
Ensure the menu is in CR Mode. See page 131.
Configure Configure
Mode
CC
Dynamic
Range
High
Panel Operation
1. Press the F2 (Range) key repeatedly
until High or Low range is selected.
Range
High
Range
Low
F1 F5
~
F2
The range will be reflected in both the
bottom menu system and the Current
Operation Channel Status panel.
CRL
CH1
main
80V
CR Static Low
CR Static High
CR Dynamic Low
CR Dynamic High
CRL
CRH
CRDL
CRDH
Note
Changing the range will only affect the current
(active) channel. Other channels will not be affected
by any changes.
All resistance values and slew rates are dependent on
Range, i.e., A Value in low range can be different from
A Value in high range.