GW Instek PEL-2000B Series, User Manual

Page: 222 / 317

PEL-2000B Series User Manual
222
Interface Configuration (settings)
The Interface Configuration chapter describes configuration
settings that apply when using the PEL-2000B mainframe with a
remote connection. There are three interface options for remote
control: UART, GPIB, LAN and USB. Only one interface can be
used at a time. For more details about remote control and interface
connections, see the Interface section on page 268.
Configuring UART Connection
Background
When using UART a number of parameters need
to be set. These include Baud rate, Stop Bit and
Parity. When setting RS232/RS485 parameters,
ensure they match that of the host machine.
Parameters
Baud Rate 2400/4800/9600/19200/38400
Stop Bit 1~2
Parity None/Odd/Even
UART mode
RS232 / RS485 (Switchable)
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
SHIFT SHIFT + CHAN
UTILITY
HELP
2. Press F3 (Interface Menu).
F1 F5
~
F3
O
Interface
LOAD
USB
05/04/22
16 : 50
USB
Configure Other Interface
System
Info
Load
Time Set