GW Instek PEL-2000B Series, User Manual

Page: 181 / 317

OPERATION
181
4. Press the Selector knob or Enter
to confirm selection.
ENTER
or
5. Repeat steps 3 to 5 to turn Von Latch ON or
OFF
For details about Von and Latch settings please
see page 84.
Note
The configuration settings only apply to the current
channel, other channels will not be affected.
Configuring the Short settings
Background
The Short Key option is used to simulate a short
circuit.
The Short Function option is used to set whether
short function is enabled or disabled.
The Short key option can be configured to toggle
(press SHORT on the load module to toggle ON or
OFF) or to Hold (the SHORT key is held to short
the load.
The Short Safety option can be used to set whether
short function enabled depends on Load ON or
not. When setting to ON, short function enabled
only when Load ON mode is enabled. When
setting to OFF, short function directly enabled
independent of Load ON mode.
Parameter
Short Function
Short Key
Short Safety
ON/OFF
Hold/Toggle
ON/OFF
Panel operation
Ensure the menu is in the configuration menu. See
page 173.
Configure
Previous
Menu
Protection
Go-NoGo Other Group