GRASS VALLEY zodiak, User Manual

Page: 418 / 458

418 Zodiak User Manual
Section 5 — System Operation
3. Press the panel button that has the macro attached.
Removing a Macro Attachment
Using the Menu and the Main Panel
1.
Go to the Macro Attach menu (touch
Macro
,
Attach
).
2. Touch either the
Pre Attach
,
Repl Attach
, or
Post Attach
button. Any button
can be pressed. All attachments will be removed.
1. Touch the
Show Attach
button so that panel buttons with macros attached
blink low tally.
2. Without selecting a macro register, press the blinking button that has
the attachment you wish to remove. The blinking button will turn off.
3. Touch
Show Attach
to turn off the mode.
Using Only the Menu
1.
Go to the Macro Attach menu (touch
Macro
,
Attach
).
2. Touch either the
M/E 1
,
M/E 2
,
M/E 3
, or
Misc
button.
3.
Scroll through the list until a macro is displayed in the Pre, Replace, or
Post columns.
4.
Touch the data pad for the displayed macro, the Macro Attach selection
menu will appear.
5.
Touch the
None
button. The macro is removed.
Appending a Macro with the Main Panel Shortcut Button
1. With the
Macro
button illuminated, press the
M/E 1 Rec
shortcut reentry
button twice and hold it down after the second press.
2. Press the macro register button on the delegated keyer row of an
existing macro to which you wish to append additional steps.
3. Release the
M/E 1 Rec
shortcut button.
4.
Perform the additional steps using the Main panel and/or the Menus.
5. Complete the append by pressing the blinking keyer row macro
register button.