GRASS VALLEY zodiak, User Manual

Page: 353 / 458

Zodiak User Manual 353
E-MEM Operations
To Perform an Auto Transition
Setup:
1. Setup for an Auto Transition is the same as a lever arm transition (see
page 352 ) with the following added step:
2. Specify the duration of the transition by turning on the
Trans Rate
button, selecting the flashing button of the desired element, and
entering a value in <seconds • <frames> • <field> format (
Time Value
Entry on page 99 ). Different durations can be specified by repeating this
process for each element.
Perform:
3.
Press the
Auto Trans
button. The picture will transition only the elements
selected at the specified rate(s). Other elements will remain unchanged.
Transitions Using E-MEM
Transitions can also be built into E-MEMs. See E-MEM Transitions on
page 361
E-MEM Operations
Recalling Registers
The Zodiak system is optimized for rapid effects recall, generally accom-
plished with a single keystroke. To access a different bank, two keystrokes
may be required.
Note If recalling effects from the Master E-MEM subpanel with Auto Recall off,
you first need to specify which levels you wish to control with the Enable but-
tons.
To Recall A Register in the Same Bank
1.
Press the E-MEM subpanel keypad number of the desired register.
To Recall A Register from a Different Bank
1. Press the ↑ ↑ ↑ ↑
Bank
button , then press the keypad number of the desired
bank.