GRASS VALLEY zodiak, User Manual

Page: 336 / 458

336 Zodiak User Manual
Section 5 — System Operation
2. Touch the Remote Aux Panel data pad and choose the Remote Aux
panel to configure. Only one Remote Aux panel can be selected at a
time.
3.
Touch
Done
to return to the previous menu.
4. Scroll the central panel and select the Aux Bus delegation button you
wish to map.
5. Scroll the Aux Buses list on the right and select the desired Aux Bus.
Note The number of Aux delegation buttons on a 24- or 32-Crosspoint Remote Aux
panel will exceed the number of available Zodiak Aux buses.
Mapping Aux Bus Pairs
When Remote Aux panels control paired Aux buses, each Aux bus in the
pair can be assigned to a different Aux delegation button on a 24- or
32-Crosspoint multi-destination panel. In this case, both the A Channel
(Video) and B Channel (Video or Key) can be controlled by separate Aux
buses. With a single destination Remote Bus panel, only one channel of the
pair can be delegated for control. A and B Channel source selections can
also be made using the Aux Bus menu.
Bus Linking
Bus linking allows a source selection on one bus to change the source on
another bus. Suite configuration settings permit the establishment of a one-
to-one relationship between different buses (a Controlling bus can affect one
other Linked bus). Once this link is established, sources on the Controlling
bus can be associated with sources on the Linked bus, such that selecting
that source on the Controlling bus causes the Linked bus to select that asso-
ciated source.
Multiple sources on a Controlling bus can be associated with a single
Linked bus source, so selecting any of those Controlling bus sources selects
that same Linked bus source. Controlling bus sources can also be given no
association, so selecting that Controlling bus source has no effect on the
Linked bus.
The collection of all the source associations between two buses makes up a
Link Mapping table. This table resides in the Controlling bus and deter-
mines what commands the Controlling bus will send to a Linked bus when
a bus link is active. The Link Mapping table can be copied to another bus,
permitting rapid setup of multiple bus links.