manualshive.com logo in svg

GRASS VALLEY zodiak, User Manual

Share
Download
GRASS VALLEY zodiak User Manual Download Page 205

Zodiak User Manual

205

External Device Menus

 

Enables Device Status

Next to each device button is a status indicator, reporting the state of the 
interface to that device. 

•

A green 

Avail

 box indicates the device is controllable from the Zodiak 

system.

•

A yellow 

Other User

 box indicates the device is responding, but is in use 

by another control point and has been locked from Zodiak system con-
trol. 

•

A red box indicates the device is not responding (

No Resp

), or is 

responding but has been placed off-line (

Off Line

). 

External Device Source Mapping

DPM and Editor Source mapping will map external device IDs to switcher 
logical source IDs and back again for status reporting. The maps have to be 
unique in both directions so the translation is deterministic and unambig-
uous. DPM and Editor mapping configuration data is saved with Suite 
Prefs. 

Editor Pane

Figure 139.  Editor Pane

The 

Editor Controls Switcher

 button toggles on and off to indicate whether the 

Editor can control source selection on the switcher.

The 

Map

 

Sources

 button accesses the External Mapping menu (

Figure 143

). 

This menu will allow the user to map any or all of the Zodiak sources to 
editor buttons. The menu does not know how many sources the editor has 

Summary of Contents for zodiak











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands