manualshive.com logo in svg

GRASS VALLEY zodiak, User Manual

Share
Download
GRASS VALLEY zodiak User Manual Download Page 253

Zodiak User Manual

253

Still Store Menus

 

Several defaults can be transferred in a single operation. The To pane’s 
selectors change to on/off LED buttons. The user can choose any combina-
tion of default. The following scenarios might exist allowing the user to 
copy:

•

A specific default source and a specific bus,

•

A specific source to all buses,

•

All sources on a specific bus,

•

All sources on an M/E, or

•

All sources to all buses on all M/E’s.

Copy Swap Macro Menu

The Macro Copy Swap Macro menu is described on 

page 198

. 

Still Store Menus

The Still Store menus have changed to accommodate the enhanced Still 
Store features. Three basic Still Store menus exist:

•

Playback

•

Create Edit, and 

•

Cache. 

While the Playback menu is optimized for playback operations, playback 
control is also available from the Create Edit menu. 

Each Still Store menu is divided into right, center, and left panes. The right 
pane provides Still Store menu delegation (selecting what output will be 
affected by the remaining menu controls), the left pane is used for still and 
clip selection, and the center pane offers playback and image capture con-
trols. Special function control panes can also temporarily appear over the 
left and right menu panes. Information reporting the status of transfers are 
displayed in the notification area at the upper right corner of the menu. 

Summary of Contents for zodiak











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands