GRASS VALLEY zodiak, User Manual

Page: 137 / 458

Zodiak User Manual 137
2.5-M/E and 3-M/E Main Panel
Rew Button
Pressing
Rew
will abort any run in progress and rewinds the effect to its
beginning (if
Rev
is off) or to its end (if
Rev
is on).
Hold Inputs Button
The
Hold Inputs
button can be used to control whether E-MEM recalls will
change any of the current source selections on any Zodiak system bus
(including the Aux buses). When on, no source on any bus will change
when an E-MEM is recalled. When off, sources may change during an
E-MEM recall (if no other types of hold are in force).
Keyframe Edit Buttons
The Keyframe Edit button group in the upper left corner of the Master E-
MEM subpanel contains ten buttons for editing and navigation of key-
frames on a timeline and an
Auto Run
button for executing effects.
For an explanation of basic keyframe concepts, refer to Keyframe on
page 62 . For an overview for using the keyframe edit and navigation con-
trols described here in conjunction with the Timeline menu, refer to Basic
Effect Editing on page 355.
Clear Work Buffer Button
As an operator recalls E-MEM effects and makes changes to the panel and
menu controls, the contents of the work buffer change accordingly. If
source memory is on, the source memory settings for each source are also
updated as the settings for sources modified. The
Clear Wk Bfr
can be used to
return work buffer and source memory settings to known states. This can
be helpful when creating effects.
Work buffer and source memory values are not set to zero when they are
cleared. Instead, previously defined settings replace the current settings.
The Default Keyframe is a single group of settings defining a particular
switcher state. These settings are copied to the work buffer when the work
buffer is cleared (see
Default Keyframe on page 72 ). The Default Source
Memory defines settings for each source. These settings are used when the
source memory is cleared (see
Work Buffer, E-MEM, and Source Memory on
page 73 ).
Clear
Work
Buffer
Go
To
KF
Previous Next
Modify Paste
Cut Copy
Insert
Before
Insert
After
Keyframe
Edit