GRASS VALLEY zodiak, User Manual

Page: 266 / 458

266 Zodiak User Manual
Section 4 — Menus Overview
The
Jog Time
knob is also available to adjust the playback time, essentially
jogging the clip. This control ignores Begin and End marks.
Clip Loop Controls
Portions of an animation may be looped. Each loop has a Loop From time-
code (where the loop begins), a Loop To timecode (where the loop jumps
to), and a Loop Count. Clip playback will jump from the Loop From point
to the Loop To point and repeat the Loop Count number of times. For
looping to occur, the Loop From point must be after Loop To point. If Loop
From is before Loop To, the material between the points will be skipped
and the Loop Count will be ignored. These adjustments can then be saved
so they are applied when that clip is loaded to a Still Store output.
The Loop data pad at the bottom of the pane displays the loop points and
loop count. Touching this data pad brings up a pane of soft knob controls
on the right (
Figure 182 ).
Figure 182. Still Store Create Edit Menu, Loop Controls
Note Loop button settings are ignored when Disable Marks is turned on.
The
Loop To
button sets the current time as the loop to location.
The
Loop From
button sets the current time as the loop from location.