GRASS VALLEY zodiak, User Manual

Page: 128 / 458

128 Zodiak User Manual
Section 3 — Control Surface Description
Up Arrow Bank Button
The
↑ Bank
prefix button operates as a shift button to provide two modes of
operation for other buttons. The actual operating mode is determined by
what other button is pressed next.
The first operating mode is used to specify a bank number. Pressing the
↑ Bank
button so it lights causes the next
0-9
number button pressed to be
interpreted as a bank number. Any bank can be selected for next use by
pressing:
↑
Bank, bank number
The
0-9
buttons are used to select the bank. Pressing the number button
completes the bank selection operation (the
Enter
key is not used). For
example, for the Recall operation, pressing the following buttons will recall
a register from another bank.
↑ Bank, bank number, register number
The selected bank is shown on the E-MEM Readout display (see E-MEM
Readout Display on page 132 ). This bank selection process is available on the
E -MEM subpanel for Recall, Learn, Sequence, and Effect Dissolve opera-
tions. The direct bank selection buttons are also available for quicker bank
selection (see below).
The second operating mode for the
↑ Bank
button is to shift the
Lock/Learn
and
Undo/
• button functions. The shifted function for these buttons are
selected when they are pressed while the
↑ Bank
button is lit.
Lock/Learn Button
The
Lock/Learn
button has two modes of operation, unshifted and shifted,
determined by the state of the
↑ Bank
button.
When unshifted (
↑
Bank
is off) the
Lock/Learn
button is used to initiate a
Learn operation that stores the current settings for that M/E level to the
specified register (or learns a sequence or an effect dissolve). A register in
the current bank is learned by simply pressing one of the
0-9
buttons on the
E-MEM keypad after the
Lock/Learn
button has been lit. The
Enter
button is
not used. The procedure is:
Lock/Learn
,
register number
The current effect can also be learned to the next empty register using the
Undo/•
button in place of the register number:
Lock/Learn
,
Undo/•
The next empty register will receive the effect data and become the current
effect. This action will not occur and an error will be displayed if there are
no empty registers.