manualshive.com logo in svg

GRASS VALLEY zodiak, User Manual

Share
Download
GRASS VALLEY zodiak User Manual Download Page 331

Zodiak User Manual

331

Button Mapping

 

Button Mapping

Button mapping assigns video sources to source selection buttons (Source 
Button mapping). Button mapping is also used to assign Aux buses to del-
egation buttons (Aux Deleg mapping). This allows you customize the Main 
Panel and each configured Remote Aux panel to meet your individual 
needs. Button mapping settings are included as part of User Preferences, 
and can be saved and instantly loaded for use at any time (see 

File Opera-

tions on page 338

). 

Local Panel Source Button Mapping

On the Zodiak system, button mappings on the Main Panel are set the same 
in each M/E, PGM/PST, and PVW/AUX bank for operating simplicity. 

The Button Mapping menu is accessed by touching 

Daily Setups

, 

User Prefs

, 

Button Mapping

 (

Figure 231

). 

Figure 231.  Button Mapping Menu

1.

Touch the 

Local 

Panel Type button to configure source to button 

mapping for the Main panel. 

2.

Touch the labeled Bank button(s) of the banks you wish to map. You can 
select one, some, for all of the banks to be mapped. Notice that a button 
for the Local Aux panel is included with the other local banks. 

Summary of Contents for zodiak











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands