manualshive.com logo in svg

GRASS VALLEY K2 SAN, Installation And Service Manual

The GRASS VALLEY K2 SAN Installation And Service Manual is a comprehensive guide that provides step-by-step instructions on setting up and servicing the K2 SAN system. This essential manual is available for free download on our website, allowing users to access the information they need conveniently and effortlessly.

Share
Download
background image

Generating host tables using SiteConfig.................................................................................................98

Managing K2 Software.............................................................................................................................101

Configuring K2 software deployment....................................................................................................101

Configuring deployment groups........................................................................................................101
Adding a software package to a deployment group..........................................................................102
Checking all currently installed software on devices.........................................................................103
About deploying software for the K2 SAN.........................................................................................103

Backup and Recovery Strategies..........................................................................................................103

About the recovery disk image process............................................................................................103
Recommended recovery process.....................................................................................................104
Creating a recovery disk image for storing on E: Dell R610..............................................................105
Restoring from a system-specific recovery disk image on E: Dell R610...........................................106
Restoring from the generic recovery disk image on E: Dell R610.....................................................108
Creating a recovery disk image for storing on E: Dell R620..............................................................110
Restoring from the system-specific recovery disk image on E: Dell R620........................................111
Restoring from a generic recovery disk image Dell R620.................................................................112
Installing the Discovery Agent on a K2 Media Server.......................................................................114
Setting up Windows...........................................................................................................................115
Activating the Windows operating system.........................................................................................116

Embedded Security modes and policies...............................................................................................116

Manage Embedded Security Update mode......................................................................................118

Configuring and licensing the K2 SAN.....................................................................................................119

About K2 SAN licensing........................................................................................................................119
About QOS on the K2 SAN...................................................................................................................119
Importing a SiteConfig system description into K2Config.....................................................................120
Configuring the basic K2 SAN - Online and Production.......................................................................120

Prerequisites for initial configuration - Basic K2 SAN........................................................................121
Defining a new K2 SAN.....................................................................................................................122
Configuring the server - Part 1..........................................................................................................125
Configuring RAID..............................................................................................................................129
Configuring the server - Part 2..........................................................................................................135
Configuring optional NH servers.......................................................................................................140

Configuring the redundant K2 SAN - Online and Production................................................................144

Prerequisites for initial configuration - Redundant K2 SAN...............................................................145
Defining a new K2 SAN.....................................................................................................................146
Configuring server A - Part 1.............................................................................................................149
Configuring RAID..............................................................................................................................153
Configuring server A - Part 2.............................................................................................................161
Configuring server B.........................................................................................................................166
Configuring optional NH servers.......................................................................................................173

Configuring the basic nearline K2 SAN................................................................................................179

Prerequisites for initial configuration - Basic nearline K2 SAN..........................................................179
Defining a new K2 SAN.....................................................................................................................180
Configuring NH server - Part 1..........................................................................................................184
Configuring RAID..............................................................................................................................188
Configuring NH server - Part 2..........................................................................................................195

Configuring the redundant nearline K2 SAN........................................................................................197

Prerequisites for initial configuration - Nearline K2 SAN...................................................................197
Defining a new K2 SAN.....................................................................................................................198
Configuring NH server A - Part 1......................................................................................................202
Configuring RAID..............................................................................................................................206
Configuring NH server A - Part 2......................................................................................................213
Configuring NH server B...................................................................................................................215

Configuring clients on the K2 SAN...........................................................................................................221

About iSCSI bandwidth.........................................................................................................................221
Determining K2 client bandwidth requirements....................................................................................221

2014 01 27

K2 SAN Installation and Service Manual

7

Contents

Summary of Contents for K2 SAN



























































































































































































































































































































































Reviews:

No comments

Related manuals for K2 SAN

IBM 8275-416 Quick Reference Card preview
8275-416
Brand: IBM Pages: 8
IBM TS7700 Series User Manual preview
TS7700 Series
Brand: IBM Pages: 117
IBM StorVize V7000 Gen2 Quick Installation Manual preview
StorVize V7000 Gen2
Brand: IBM Pages: 188
Palram Cold Frame Single Assembly Instructions Manual preview
Cold Frame Single
Brand: Palram Pages: 11
dallmeier DAS-300 E Installation And Commissioning Manual preview
DAS-300 E
Brand: dallmeier Pages: 32
Seagate BARRACUDA 18FC Installation Manual preview
BARRACUDA 18FC
Brand: Seagate Pages: 32
TRENDnet TS-U100 - NAS Server - USB User Manual preview
TS-U100 - NAS Server - USB
Brand: TRENDnet Pages: 47
Beta C24SA-XL/8-O Instructions For Use Manual preview
C24SA-XL/8-O
Brand: Beta Pages: 7
GRE DECK1 Assembly Instructions Manual preview
DECK1
Brand: GRE Pages: 24
Toshiba SATA MK1231GAS Specification Sheet preview
SATA MK1231GAS
Brand: Toshiba Pages: 2
Toshiba MK6034GAX Series Installation Notes preview
MK6034GAX Series
Brand: Toshiba Pages: 4
Kanguru BioAES User Manual preview
BioAES
Brand: Kanguru Pages: 22
NetApp DS2246 Installation And Service Manual preview
DS2246
Brand: NetApp Pages: 74
Medion P89625 Instruction Manual preview
P89625
Brand: Medion Pages: 112
Agilent Technologies 04287-65000 Service Note preview
04287-65000
Brand: Agilent Technologies Pages: 14
Targus ADW02US User Manual preview
ADW02US
Brand: Targus Pages: 4
OLT GS84-S-FJ-Metal Assembly Manual preview
GS84-S-FJ-Metal
Brand: OLT Pages: 39
OLT GardenSaver GS124-SLIDER-PLY-AK Assembly Manual preview
GardenSaver GS124-SLIDER-PLY-AK
Brand: OLT Pages: 40

Brands by name

Popular brands

Load more brands