manualshive.com logo in svg

GRASS VALLEY K2 SAN, Installation And Service Manual

The GRASS VALLEY K2 SAN Installation And Service Manual is a comprehensive guide that provides step-by-step instructions on setting up and servicing the K2 SAN system. This essential manual is available for free download on our website, allowing users to access the information they need conveniently and effortlessly.

Share
Download
background image

Administering and maintaining the K2 SAN.............................................................................................263

Passwords and security on Grass Valley systems................................................................................263

About application security on the K2 SAN........................................................................................264
About credentials in SiteConfig.........................................................................................................264

Modifying K2 SAN settings...................................................................................................................265

Accessing K2 SAN features..............................................................................................................265
About SiteConfig and K2Config settings...........................................................................................265
About Control Panel, SiteConfig, and K2Config settings..................................................................267
Synchronizing K2Config information to GV STRATUS Control Panel...............................................267
Renaming a K2 SAN.........................................................................................................................269
Adding devices to a K2 SAN.............................................................................................................269
Removing a K2 SAN.........................................................................................................................270
Accessing a K2 SAN from multiple PCs............................................................................................271
Taking a K2 SAN offline....................................................................................................................271
Bringing a K2 SAN online..................................................................................................................272
Viewing iSCSI assignments..............................................................................................................272
Using reference files..........................................................................................................................272

Managing redundancy on a K2 SAN....................................................................................................273

Identifying current primary/backup K2 Media Servers......................................................................274
Triggering an intentional failover........................................................................................................275
Recovering from a failover.................................................................................................................276

Working with K2 Media Servers............................................................................................................277

Accessing K2 Media Server features in the K2Config application ...................................................277
Taking a K2 Media Server out of service...........................................................................................277
Using the Stop button in Server Control Panel..................................................................................278
Placing a K2 Media Server in service ..............................................................................................279
Shutting down or restarting a K2 Media Server................................................................................279
Identifying K2 Media Server software versions.................................................................................279
Modifying K2 Media Server network settings....................................................................................279
Configuring Server 2008 for domain.................................................................................................280
Restoring network configuration........................................................................................................282
Removing a K2 Media Server...........................................................................................................285
Replacing a K2 Media Server...........................................................................................................285
Replacing an iSCSI interface adapter (TOE card)............................................................................287
Installing the Fibre Channel card driver............................................................................................288
Recovering from a failed K2 Media Server system battery...............................................................288
Checking K2 Media Server services.................................................................................................289
Licensing a K2 Media Server............................................................................................................291

Working with K2 clients.........................................................................................................................293

Accessing K2 client features in the K2Config application ................................................................293
Shutting down or restarting a K2 client.............................................................................................294
Taking a K2 client offline...................................................................................................................294
Bringing a K2 client online ................................................................................................................294
Adding a K2 client.............................................................................................................................294
Removing a K2 client........................................................................................................................295
Identifying K2 client software versions..............................................................................................295
Modifying K2 client control network settings.....................................................................................295
Modifying K2 client media (iSCSI) network settings..........................................................................296

Using Storage Utility.............................................................................................................................296

Accessing Storage Utility..................................................................................................................297
Overview of Storage Utility................................................................................................................297

Working on the media file system and database..................................................................................298

Checking the media file system........................................................................................................298
Cleaning unreferenced files and movies...........................................................................................299
Making a new media file system.......................................................................................................300
Expanding the media file system by capacity...................................................................................302
Expanding the media file system by bandwidth................................................................................303

2014 01 27

K2 SAN Installation and Service Manual

9

Contents

Summary of Contents for K2 SAN



























































































































































































































































































































































Reviews:

No comments

Related manuals for K2 SAN

IBM Storwize V7000 Quick Installation Manual preview
Storwize V7000
Brand: IBM Pages: 102
LaCie Starck Mobile USB 3.0 Specifications preview
Starck Mobile USB 3.0
Brand: LaCie Pages: 2
LaCie Skwarim Datasheet preview
Skwarim
Brand: LaCie Pages: 2
LaCie Rugged Thunderbolt Manual preview
Rugged Thunderbolt
Brand: LaCie Pages: 4
LaCie Rugged All-Terrain User Manual preview
Rugged All-Terrain
Brand: LaCie Pages: 37
LaCie LaCinema Classic HD User Manual preview
LaCinema Classic HD
Brand: LaCie Pages: 81
LaCie 2big Network 2 Datasheet preview
2big Network 2
Brand: LaCie Pages: 4
Data General 6045 Series Manual preview
6045 Series
Brand: Data General Pages: 58
IBM DTTA-351010 - Deskstar 10.1 GB Hard Drive Specifications preview
DTTA-351010 - Deskstar 10.1 GB Hard Drive
Brand: IBM Pages: 188
Kanguru Q2S-3H-15T User Manual preview
Q2S-3H-15T
Brand: Kanguru Pages: 12
Medion P83771 Instruction Manual preview
P83771
Brand: Medion Pages: 37
SanDisk CruzerSync Getting Started Manual preview
CruzerSync
Brand: SanDisk Pages: 7
Orico MSG-U3 User Manual preview
MSG-U3
Brand: Orico Pages: 27
Microdia MMCPLUS Operating Manual preview
MMCPLUS
Brand: Microdia Pages: 1
DataDirect Networks S2A9550 User Manual preview
S2A9550
Brand: DataDirect Networks Pages: 118
Dedicated Micros MSUA1T25 Setup And Maintenance Manual preview
MSUA1T25
Brand: Dedicated Micros Pages: 12
Dell PowerVault Manual preview
PowerVault
Brand: Dell Pages: 396
Dell PowerVault 600 Getting Started preview
PowerVault 600
Brand: Dell Pages: 180

Brands by name

Popular brands

Load more brands