GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 115 / 346

SiteConfig Discovery Agent currently installed, you should use SiteConfig to upgrade the Discovery
Agent, rather than installing it manually.
1. On the device you plan to manage with SiteConfig, open the Windows Services Control Panel
and look for the following required item:
• ProductFrame Discovery Agent
2. Proceed as follows:
• If you find the required items, no further steps are necessary. SiteConfig support software is
installed.
• If a required item is not present, navigate to your SiteConfig files. If you do not already have
these files in convenient location, you can find them on the PC that hosts SiteConfig, in the
SiteConfig install location. Then continue with next steps as appropriate.
3. To launch the program that installs the ProductFrame Discovery Agent Service do the following:
a) Copy the
Discovery Agent Setup
directory to the device.
b) In the directory, double-click the
DiscoveryAgentServiceSetup.msi
file.
The setup program launches to install the SiteConfig Discovery Agent.
c) Follow the setup wizard.
4. When presented with a list of device types, select the following:
• K2Server
5. Complete the setup wizard and restart the device.
The restart is required after the installation.
Setting up Windows
If a system is restored using the factory-default generic disk image or otherwise has the Windows
operating system re-applied, a Windows set up process is required.
1. Upon first startup after reimage, a Windows Setup Wizard automatically opens. Work through
the wizard as follows:
a) Enter in the Windows Product Key and click
Next
.
The Product Key is on a sticker on the top of the machine near the front right corner.
b) Enter the name of the machine.
To restore the factory-default name, enter the Serial Number (located at the right side and
rear). The password is pre-set to the factory default. Leave the password as is.
c) Click
Next
.
d) Set Time and click
Next
.
Windows loads components and restarts the K2 Media Server.
2. Upon restart, log in to Windows.
3. Rename the machine and set Windows clock as necessary.
2014 01 27 K2 SAN Installation and Service Manual 115
Managing K2 Software