GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 289 / 346

6. Restart the K2 Media Server.
A startup screen displays the message “Warning: Detected mode change from SCSI to RAID on
ChA of the embedded RAID system.”
7. Select
Yes
.
A startup screen displays the message “Warning: Detected mode change from SCSI to RAID on
ChB of the embedded RAID system.”
8. Select
Yes
.
The K2 Media Server restarts as normal.
When startup completes, normal operation is restored.
Checking K2 Media Server services
The following table specifies the startup type of services for the different K2 Media Server roles.
Depending on a K2 Media Server's roles, some services have different startup types. Unless otherwise
noted, services with startup type Automatic are started, while services with startup type Manual or
Disabled are not started. You can use this table to check services if you suspect that they have been
tampered with or for any reason are not set correctly.
To reset services, reconfigure the server with the K2Config application, starting at the beginning of
the configuration wizard. Do not manually change the way services run on a configured K2 Media
Server.
NAS server FTP server Metadata server iSCSI bridge SNFS file system
server Service
Automatic Automatic Manual Automatic Automatic
2
*CvfsPM
1
Automatic Automatic Automatic Automatic Automatic Grass Valley
AppService
Manual Manual Manual Manual Manual Grass Valley
Extent Manager
Service
Manual Automatic
3
Manual Manual Manual *Grass Valley
FTP Dameon
Manual Manual Manual Manual Manual Grass Valley
Import Service
Automatic Automatic Automatic Automatic Automatic Grass Valley K2
Config
2
This startup type is top priority for servers with this role. In other words, if a server has this role, then this is always the
service’s startup type, regardless of other roles that specify a different startup type.
1
With SNFS version 3.5, this is the only service. Previous versions had StorNext File System service and StorNext File
System RPC Port Mapper service
3
This startup type is top priority for servers with this role. In other words, if a server has this role, then this is always the
service’s startup type, regardless of other roles that specify a different startup type.
2014 01 27 K2 SAN Installation and Service Manual 289
Administering and maintaining the K2 SAN