GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 111 / 346

13. On the Backup Details page, select the
Progress
tab to view the progress.
14. Verify when the data is successfully backed up.
15. Close all Acronis pages and the Acronis main window.
The machine restarts automatically.
16. Remove the recovery media while the machine is shutting down.
The backup consists of a directory and multiple files. Keep all files and directories intact. Do not
delete or separate.
Restoring from the system-specific recovery disk image on E: Dell R620
Use this task to restore a server using an image made from that particular server. If restoring from
a generic factory default image, do not use this task.
1. Make sure that media access is stopped and that the system on which you are working is not
being used.
2. Connect all motherboard NICs to LAN connections.
3. If you have not already done so, connect keyboard, monitor, and mouse.
4. Do the following:
a) Insert the Recovery CD.
b) Restart the machine.
If there is a problem restarting, hold the standby button down for five seconds to force a hard
shutdown. Then press the standby button again to startup.
The system boots from the Recovery CD.
The Acronis program loads.
5. On the Acronis Rescue Media page, select
Acronis Backup and Recovery 11.5 (64-bit...)
The Acronis Backup and Recovery page opens.
6. On the Acronis Backup and Recovery page, select
Recover
.
The Recover Data page opens
7. On the Recover Data page, under What to Recover page, select
Select Data
.
The Data to Recover Selection dialog box opens.
8. On the Data to Recover Selection dialog box, do the following:
a) Select
Browse
.
b) In the tree view, expand the
Local Folders
node.
c) Select the
E
drive.
Even though your backup is on the E drive, it is not yet visible.
d) Click
OK
.
On the Archive View tab, your backup name is listed.
9. On the Archive View tab, select your backup.
2014 01 27 K2 SAN Installation and Service Manual 111
Managing K2 Software