GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 102 / 346

3. Right-click the deployment group and select
Add Target Device
.
The Add Target Device(s) wizard opens.
4. In the Available Target Devices tree view, select the node that displays the devices that you are
combining as a deployment group.
5. In the right-hand pane, select the devices that you are combining as a deployment group.
To select multiple devices, you can drag through the devices, use Ctrl + Click, or use Shift +
Click.
6. Click
OK
.
The devices appear in the Deployment Groups tree view under the deployment group. Before you
perform a software deployment, you must check software on the devices that will be receiving new
software. If you have already added packages to the group, on the Deployment Groups tab you will
also see deployment tasks generated for every device with roles that match the package contents.
Adding a software package to a deployment group
1. In the
Software Deployment | Deployment Groups
tree view, select a deployment group.
2. Click the
Add
button.
The Add Package(s) dialog box opens.
3. Do one of the following to select the software package:
• Select from the list of packages then click
OK
.
• Click
Browse
, browse to and select the package, then click
Open
.
4. If one or more EULAs are displayed, accept them to proceed. If you do not accept a EULA, the
associated software is not assigned to the deployment group.
SiteConfig adds the package to the deployment group.
102 K2 SAN Installation and Service Manual 2014 01 27
Managing K2 Software