Out of the Box
♦
C1 - 3
Installing the Accuload System
The Accuload system consists of two media brackets, two stock rollers and one media alignment
bar.
Installation procedure
1. Place the media bracket (right) against the inside surface of the plotter’s side box (right).
2. Insert an M4 screw at the second hole from the front side of the plotter.
NOTE:
Do not over tighten so that the bracket can rotate easily.
ASSEMBLY TIP:
When attaching the bracket on to the cutter, use the foam shipping cover
to protect the cutter.
CAUTION:
Do not lay the cutter on it’s back side, it may damage the Media Set Lever.
3. Insert an M4 screw at the third hole from the front side of the plotter.
4. Secure the first screw.
5. Secure the second screw.
6. Repeat steps 1-5 with the Media Bracket (left).
Summary of Contents for Cutting Pro FC4100-100
Page 1: ...cutting pro FC4100 series series USER S MANUAL 1 a...
Page 138: ...Setting the Interface Functions C7 7 Input Output Circuitry Input Output Timing Chart...
Page 147: ...Specifications C8 6 FC4100 100 without Stand FC4100 100 with Stand Standard and Basket Option...
Page 148: ...Specifications C8 7 FC4100 130 without Stand FC4100 130 with Stand Standard and Basket Option...
