Advanced Functions and Settings
♦
C4 - 19
ROLL-1>
ROLL-2>
SHEET>
CINTINUE>
DATA SORTING>
AXIS ALIGNMENT>
AUTO PRE FEED>
TANGENT EMULATION>
CONDITION 2 14
30
SORTING 4
CB09UX 0
If CONTENU is selected, the MEDIA TYPE MENU then appears.
Select the media type you wish to use.
Press the F1 key to select ROLL-1.
Press the F2 key to select ROLL-2.
Press the F3 key to select SHEET.
The following menu appear .
The plotter begins sorting immediately when it receives the cut
data from the PC.
If CANCEL is selected, return to the previous menu .
Press the MENU key to cancel the menu mode.
NOTE:
The plotter begins sorting immediately when it receives the cut data from the PC,
however, the cutting/plotting may experience a delay due to the data sorting process.
While the plotter is data sorting, following key operations become invalid.
Direct keys: COPY, ORIGIN, AXIS ALIGNMENT, CONDITION
F KEYS TO SELECTING CONDITION NUMBER
Menu mode: All the functions except for PEN UP/DOWN,
BUFFER CLEAR and FEED
NOTE:
Your data sorting setting is retained in the plotter’s internal memory even while the
plotter is turned off.
Summary of Contents for Cutting Pro FC4100-100
Page 1: ...cutting pro FC4100 series series USER S MANUAL 1 a...
Page 138: ...Setting the Interface Functions C7 7 Input Output Circuitry Input Output Timing Chart...
Page 147: ...Specifications C8 6 FC4100 100 without Stand FC4100 100 with Stand Standard and Basket Option...
Page 148: ...Specifications C8 7 FC4100 130 without Stand FC4100 130 with Stand Standard and Basket Option...
