Preparing to Cut
♦
C3 - 7
Loading Media
This section describes the steps for loading media in the plotter. Note that the media can be
loaded either before or after turning on the plotter.
CAUTION:
Be sure to move the pen carriage slowly. Moving the pen carriage quickly may
damage the plotter.
NOTE:
If necessary, slowly move the pen carriage out of the way while the power is off. After
the first initialization, use the arrow keys to move the pen carriage.
Sheet Media
CAUTION:
To avoid damaging the cutting mat, make sure to set the media type to SHEET
when using sheet media. Whenever possible, use sheet media of rectangular
shape.
1. Load the Media
a) Lower the media set lever to raise the pinch rollers.
b) Load the media in the plotter. Use the yellow markings to locate the grit rollers. Place
the media so that its edges align with the grit rollers.
Summary of Contents for Cutting Pro FC4100-100
Page 1: ...cutting pro FC4100 series series USER S MANUAL 1 a...
Page 138: ...Setting the Interface Functions C7 7 Input Output Circuitry Input Output Timing Chart...
Page 147: ...Specifications C8 6 FC4100 100 without Stand FC4100 100 with Stand Standard and Basket Option...
Page 148: ...Specifications C8 7 FC4100 130 without Stand FC4100 130 with Stand Standard and Basket Option...
