Test Modes and Troubleshooting
♦
C6 - 1
OPTION 1>
OPTION 2>
DISTANCE ADJUST>
TEST>
Chapter 6 Test Modes and Troubleshooting
This chapter describes the check points and possible solutions to use for troubleshooting if the
plotter does not operate or operates abnormally.
CONDITION LIST - Listing the Cutting Conditions
The CONDITON LIST function allows you to print a list of the settings of the four groups of cutting
conditions, so you can check all of your current settings at a glance.
WARNING:
The pen starts moving as soon as the CONDITON PRINT function is selected.
To avoid injury to yourself and damage to the plotter, keep your hands, face and
other obstacles out to the vicinity of the cutting mat and paper.
CAUTION:
Mounting the cutter pen for this mode may cause fatal damage to the cutting
mat. Be sure to mount the plotter pen.
Load paper whose size is larger than either ISO (A4) or Letter size (11” x 8½”) and mount the
plotter pen.
Press the MENU key to select MENU mode.
Press the NEXT key.
Press the NEXT key again.
Press the NEXT key again.
Press the F4 key to select OPTION 2.
Press the F4 key to select TEST.
Summary of Contents for Cutting Pro FC4100-100
Page 1: ...cutting pro FC4100 series series USER S MANUAL 1 a...
Page 138: ...Setting the Interface Functions C7 7 Input Output Circuitry Input Output Timing Chart...
Page 147: ...Specifications C8 6 FC4100 100 without Stand FC4100 100 with Stand Standard and Basket Option...
Page 148: ...Specifications C8 7 FC4100 130 without Stand FC4100 130 with Stand Standard and Basket Option...
