Preparing to Cut
♦
C3 - 15
CAUTION:
The position of the Middle Pinch Roller on the FC4100-100 and FC4100-130
Cutting Plotters effects the cutters performance.
n
If the middle pinch roller is not positioned in the center range of the media AND located over
the grit roller, the media will not feed evenly.
CAUTION:
When cutting narrow media that is 10 inches or smaller, the position of the Left
and Middle Pinch Rollers will effect the performance of the FC4100-100 and
FC4100-130 Cutting Plotters.
n
Lower the media set lever to raise the pinch rollers.
n
Move the left pinch roller next to the middle pinch
rollers.
n
Move both the left and middle pinch rollers together
until they reach the right stop.
n
Load the media so that the left side of the narrow
media under the left pinch roller.
n
Adjust right pinch roller over the right side of the
media.
n
Raise the media set lever to lower the pinch rollers.
Good Pinch Roller Position
Poor Pinch Roller Position
Good Pinch Roller Position
Summary of Contents for Cutting Pro FC4100-100
Page 1: ...cutting pro FC4100 series series USER S MANUAL 1 a...
Page 138: ...Setting the Interface Functions C7 7 Input Output Circuitry Input Output Timing Chart...
Page 147: ...Specifications C8 6 FC4100 100 without Stand FC4100 100 with Stand Standard and Basket Option...
Page 148: ...Specifications C8 7 FC4100 130 without Stand FC4100 130 with Stand Standard and Basket Option...
