Goldacres Super Cruiser G8, Operator'S Manual, Page: 98 / 210

94 - Chapter 8 - Operation G8 Super Cruiser Operator’s Manual MY19 - REV 0
RapidFlow
Overview
RapidFlow is a boom recirculation system. In order
to ensure that boom lines are charged and ready
to spray, a standard sprayer plumbing system will
require the boom lines to be purged with chemical
mix prior to spraying. RapidFlow allows an agitated
chemical mix to be run through the boom lines
prior to spraying - pre-charging them and eliminating
waste.
Operation
NOTE: It is important that boom recirculation
is turned off before spraying. If it is left on while
spraying, the flow meter will read incorrectly leading
to the wrong amount of chemical being applied.
BEFORE SPRAYING (CHARGING THE LINES)
1. Turn off all boom sections on the console.
2. Have the pump running agitating the tank mix.
3. Turn on boom recirculation switch.
NOTE: The lines will require at least 80L of fluid to
fill them.
4. When ready to spray turn off boom recirculation
and turn on the required boom sections.
AFTER SPRAYING (RINSING)
1. Turn off all boom sections on the console.
2. Set spray pump suction mode to rinse tank.
3. Turn pump on.
4. Turn on boom recirculation switch.
NOTE: The boom sections can be pulsed on/off to
flush/rinse the tips and nozzle bodies.
5. Turn off boom recirculation switch.
6. Turn spray pump off.
7. Reset spray pump suction mode back to main
tank.