Goldacres Super Cruiser G8, Operator'S Manual, Page: 41 / 210

Chapter 4 - Cabin - 37 G8 Super Cruiser Operator’s Manual MY19 - REV 0
This table lists the engine and transmission
parameters that can be displayed by GEM and
which may be shown in user-configurable Quad
Display and Uni Display modes (a tick indicates the
parameter may be selected). DB is an abbreviation
for GEM’s internal database, which stores all data
transmitted from the engine/transmission. It can be
accessed via the Configuration menu. (Note that
this list is current at the time of going to press, new
parameters are continually being added - the latest
list may be found in the latest GEM data sheet
available at <http://www.cantrak-int.com>).
Abbreviations: The units ‘MPG’ and ‘Gal’ denote US
gallons. For non-US Imperial gallons (UK, Canada,
etc) units, these units are denoted as IMPG or IGal.
N = nautical. KTS = Knots.
NOTE: If a parameter is not available, it will not
be possible to select it. If the parameter becomes
unavailable while in view, ‘- - -’ is displayed.
CANtrak System - Parameters Monitored
Continued over page
Engine & Transmission
Parameters Monitored