Goldacres Super Cruiser G8, Operator'S Manual, Page: 53 / 210

Chapter 4 - Cabin - 49 G8 Super Cruiser Operator’s Manual MY19 - REV 0
This mode allows users to set various GEM
operating parameters such as imperial or metric
units, scale limits for the speedometer, engine service
interval, etc. The configuration menu is entered by
pressing and holding key 5 (‘Exit door’ icon) for at
least 3 seconds while GEM is in normal operating
mode. The top-level configuration menu will be
displayed as shown below. Use Keys 1 and 2 (up
and down arrows) to point to either SETTINGS
or SYSTEM sub-menus. Press key 4 to enter the
selected sub-menu. User preferences are set in
SETTINGS sub-menu. SYSTEM sub-menu accesses
maintenance and low-level system configuration
settings. These sub-menus are detailed below. Key 5
(‘Exit door’ icon) exits the current menu/sub menu.
Settings are automatically stored on exit.
Above: The top-level Configuration menu showing two choices of SETTINGS and SYSTEM sub-menus.
Pressing Key 4 enters the menu highlighted. Key 5 showing the ‘exit door’ icon returns you to the previous
menu.
Configuration Menu
CANtrak System - Configuration
Continued over page
Settings Sub-Menu
The settings sub-menu allows the user to configure
or view the following items:
UNITS: Speed, distance, pressure, volume, etc.
LANGUAGE: Choose from various language options.
BEEP: Keys “beep” when pressed (toggles on or off);
note that an audible beep still sounds if an alarm
occurs.
DISPLAY: Select ranges for max. RPM, max. speed,
and graph X axis.
SERVICE: Set service interval in hours, and reset
interval counter.
FUEL CAPACITY: Adjust tank capacity and reset
tank level to full.