
110 - Chapter 9 - Boom
G8 Super Cruiser Operator’s Manual MY19 - REV 0
Boom Adjustment - 36-42 m
1. Open the boom fully into the working position.
2. Continue to press the unfold button or hold
the hydraulic remote open to ensure the fold
cylinders are opened completely.
3. Look along the inner booms between the fold
hinge and the centre to assess the alignment.
All booms must be 50 mm forward of the centre
section at the fold hinge. A string line can also be
used for measuring the lead of the inner boom
(see below).
4. If adjustment is required, loosen the two lock-nuts
on the boom fold adjuster bolt at the rear of the
boom.
5. To adjust the boom forward, tighten the outer
adjuster nut. To adjust the boom rearward, tighten
the inner adjuster nut
6. When the boom is in the required position
tighten both locknuts to hold in place.
7. Follow this process for both inner booms.
NOTE:
It is important that both wings are adjusted
the same. If one wing is adjusted further forward or
back than the other, the boom may not sit level.
D
E
F
C
B
A
3
2
1
5
C
D
4
6
7
8
A
B
Kg
DEBUR ALL EDGES
DRG. STANDARD
/PRACTICE
AS 1100
REV
22/12/2015
Drawing Checked:
FINISHED WEIGHT:
Approved
Surface Finish:
THIS DRAWING REMAINS THE PROPERTY
OF GOLDACRES TRADING PTY LTD AND IS
SUBJECT OF COPYRIGHT
UNTOL. DIMENSIONS
OPEN DIM ± 0.20
ONE DEC. PL. ± 0.10
TWO DEC. PL. ± 0.05
ANGULAR ± 0.50°
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE
IN MILLIMETRES
23/03/2010
DATE EDITED:
ECN NO.
NAME/DATE
CHANGE
REV NO
David
C.Turner
Centre Section Assembly, G8
Main Centre Assembly G8 MY15 - TEST
1-3 MORANG CR
MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
Drawn By:
Material
:
DO NOT SCALE DRAWING
GOLDACRES
TITLE:
DWG NO.
SCALE:1:10
SHEET 1 OF 1
A3
4
3
2
1
Tighten nut to adjust the boom forward.
A
B
Tighten nut to adjust the boom backward.
50 mm measured to the front edge
of the lower rear most chord on
the boom inner.
Straight edge or string line runs in
line with lower boom pivots on
under side of centre section.
50 mm
Alignment - Unfolded Angle - Inner 36m
Summary of Contents for Super Cruiser G8
