Goldacres Super Cruiser G8, Operator'S Manual, Page: 173 / 210

Chapter 11 - Troubleshooting - 169 G8 Super Cruiser Operator’s Manual MY19 - REV 0
PROBLEM COMMON CAUSES COMMON SOLUTION
Brakes are not responding Leak in brake lines
Inspect all hydraulic lines & repair if
necessary
Sprayer is stopping
inconsistently
Low hydraulic pressure
Check the level of main hydraulic tank
Check main hydraulic pressure to ensure
there is enough flow
Brakes are squealing High oil heat in differential Cool the differential
Park brake not holding
Brake disc wear
Adjust park brake as per ‘lubrication &
Maintenance’ chapter
Pressure in brake line
Inspect switch and ensure that the
hydraulic spool is operating correctly
Plumbing
PROBLEM COMMON CAUSES COMMON SOLUTION
No water at boom No Tier value entered or is at 0 Enter value greater than 0
PROBLEM COMMON CAUSES COMMON SOLUTION
Induction hopper is not
performing as well as it
should
Insufficient flow to venturi in
the hopper bottom
Check the pressure supplied to the hopper
bottom is around 550 kPa (80 PSI).
Air leaks on induction system
Check all hoses, clamps, and cam lever
fittings are sealed
Induction Hopper
Brakes
Air Conditioning
PROBLEM COMMON CAUSES COMMON SOLUTION
Air conditioning not cooling
effectively
Condenser Blocked
Check the condenser for a build up of dirt
and plant matter, clean if required.
Compressor belt loose
Inspect the belt to see if it is tensioned
correctly. If belt is showing signs of wear,
replace.
A/C system needs re-gassing
If this is the case, only allow a qualified air
conditioning technician to work on the
system. R134a refrigerant must not be
allowed to escape to the atmosphere.
Evaporator blocked
Build up of dirt and plant matter, clean if
required. Be careful not to damage any of
the components.