Goldacres Super Cruiser G8, Operator'S Manual, Page: 136 / 210

132 - Chapter 10 - Lubrication & Maintenance G8 Super Cruiser Operator’s Manual MY19 - REV 0
A carbon air cleaner is fitted to the right hand side
of the cabin. This filter cleans the impurities from the
air being drawn into the cabin. The air is drawn in
through the carbon filter by a fan and pressurises the
cabin to prevent impure air entering the cab from
any holes or seal leaks. The filter elements have a
foam pre-cleaner covering them, this foam element
can be removed and washed in water. The element
must be totally dried before refitting. Carbon balls
inside the filter capture any impurities in the air that
are drawn through it. A colour indicator on the end
of the filter identifies when the carbon balls need
to be recharged to maintain filtering effectiveness.
By removing the element from the housing and
inspecting the colour of the carbon balls the service
life can be witnessed. When the indicator shows the
filter needs to be recharged it must be replaced with
a new carbon filter or recharged by a certified agent.
COLOUR GUIDE:
Purple - Active
Brownish Orange - Active
Brownish Red - Requires recharging or replacing
NOTE: Filter specifications can be found in the
‘Filters’ section at the beginning of this chapter.
Cabin Air Cleaner
Clamp
thread
It is recommended to inspect the filters when the
machine is new. Inspection of the primary filter
should be carried out at service intervals or when
the vacuum gauge indicates. NEVER clean the
secondary filter, this filter should be replaced if it is
contaminated or damaged.
NOTE: Filter specifications can be found in the
‘Filters’ section at the beginning of this chapter.
Engine