Goldacres Super Cruiser G8, Operator'S Manual, Page: 202 / 210

198 - Chapter 12 - Optional Accessories G8 Super Cruiser Operator’s Manual MY19 - REV 0
Right: Meter unit in
phase C
IMPORTANT: It is not advisable to open the
metering units as this allows the entry of dirt, and
thus is a potential cause of faults and failures.
Groeneveld Auto Greaser - Meter Unit Operation
PHASE C. During the next lubrication cycle, the
same happens as in phase A. Chamber (8) however,
is now filled with grease. As plunger (4) moves right
under influence of the grease pressure, the grease
in chamber (8) is pressed, via chamber (6) and the
secondary grease line, to the grease point. During all
this, O-ring (9) is pressed outward to allow the grease
to leave chamber (8).