Goldacres Super Cruiser G8, Operator'S Manual, Page: 174 / 210

170 - Chapter 11 - Troubleshooting G8 Super Cruiser Operator’s Manual MY19 - REV 0
Hydraulic & Pneumatic
PROBLEM COMMON CAUSES COMMON SOLUTION
All hydraulic functions are
unresponsive
Unloader(s) malfunction or
disconnected
Check electrical connection to spool block
unloader and Norac unloader if fitted.
Check that power is present at connector
to spool block unloader and Norac
unloader if fitted. If no power then check
fuses. Check for physical malfunction to
unloader(s) and replace as necessary.
48M Boom ONLY -
Programmable Logic Controller
(PLC) malfunction or
disconnected
Check electrical connection to PLC. Check
that power is present at connector to PLC.
If no power then check fuses. Check for
physical malfunction to PLC and replace as
necessary.
No hydraulic pressure
Low hydraulic oil level
Check the oil level in the hydraulic
reservoir and top up if necessary
Fill pump is engaged Switch the hydraulic fill pump off
The air bags are not inflating
Low system pressure
The bags will not inflate until the pressure
in the system is above 75 PSI, check system
pressure.
Compressor not working
properly Check that the compressor is working
correctly
Vehicle sits unevenly
Incorrectly adjusted ride height
valves.
Adjust the ride height valves as per
the instructions in the Lubrication and
Maintenance chapter.