manualshive.com logo in svg

Goldacres Super Cruiser G8, Operator'S Manual, Page: 54 / 210

Share
Download
Goldacres Super Cruiser G8 Operator'S Manual Download Page 54

50

 - Chapter 4 - Cabin 

G8 Super Cruiser Operator’s Manual MY19 - REV 0

System Sub-Menu 

 

The system sub-menu allows the user to configure 

or view the following items: 

DEMO: 

Switches between GEM’s demonstration 

mode and the normal mode of displaying live engine/ 
transmission data. Demo allows GEM to operate 
without live data and provides 3 levels of simulated 
data: 1 = Speed On; 2 = Speed Off; 3 = Alarms 
On. Demo is automatically set to OFF if live data 
is received. DEMO mode can be selected, allowing 
you to evaluate GEM without connecting an engine/ 

transmission (it is accessed via the Configuration 

menu described above). If the unit is in DEMO mode 
and live data from the engine/ transmission becomes 
active, DEMO mode will automatically be switched 
off.

RESTORE DEFAULTS:

 Allows you to reset all 

configuration information to default metric or 

imperial values. The default settings are:

COM VIEWER: 

Displays last messages received 

on J1939 (CAN) and NMEA 0183 (GPS - derived 

speed over ground data) ports. You can also 

view GEM’s database (DB) which stores all data 

transmitted from the engine/transmission. 

NOTE:

 this is a diagnostic feature that may be 

helpful for OEMs/users diagnosing faults. 

J1939 SETTINGS:

 J1939 configuration screen 

for engine and transmission source: 1 = engine 

1 (port), 2 = engine 2 (Starboard); alarm filter 
(GLB (Global) = all alarm sources, SRC = selected 
engine/ transmission only); SPN version (4 is default 

but older engines will need to be set to 1, 2 or 
3 as appropriate). Note. Consult your engine or 

vehicle supplier to establish which SPN version is 

appropriate if you have problems reading alarm data. 

ABOUT:

 Displays the following product information: 

•  ID NO: Unique number of the display.

•  EEPROM: Number of write cycles.

•  PART No: Software part number.

•  VERS: Software version number.

•  CHK: Flash memory checksum.

•  SOURCE: The source of received data.

•  LIB1: Low level system library version.

•  LIB2: Low-level graphical display interface library 

version (if used).

CANtrak System - Configuration

Continued over page

Summary of Contents for Super Cruiser G8



















































































































































































































Reviews:

No comments