
Chapter 3 - General Information & Specs -
13
G8 Super Cruiser Operator’s Manual MY19 - REV 0
ID plate located on the left
hand chassis rail near steps.
Identification & Parts Ordering
When ordering parts or requesting service
information for your sprayer it is important to quote
the serial number of your machine, and the purchase
date, in order to receive accurate information. The
location of the serial number plate on your machine
is shown in the picture.
NOTE:
To identify the exact options fitted to your
particular machine, refer to the original quotation
and/or build sheet. If needed, a copy of the build
sheet may be obtained by contacting your dealer
and quoting your machine serial number as
described above.
When ordering parts from your Goldacres dealer,
please quote:
• Machine serial number
•
Part number required
•
Part description
• Quantity required
The parts manual supplied with this machine
includes all the relevant information that you need
when ordering parts from your dealer. When
returning parts to a Goldacres dealer for service or
repair, all parts MUST be cleaned thoroughly before
sending them. Dealers cannot expose technicians
to the many potentially hazardous pesticides and
substances that are in use.
NOTE:
Please ensure that all parts are clearly
labelled with the owner’s details, and a brief
description of the fault. Dealers are not liable for
the return of any goods to a Goldacres Dealer. The
goods must be returned to the point of sale.
Genuine Goldacres parts only should be used on
Goldacres equipment.
Wheels & Tyres
NOTE:
PSI = Kpa x 0.145
EXAMPLE:
240 Kpa x 0.145 = 34.8 PSI
Tyre pressures need to be checked regularly - check
every 8 to 12 hours of operation.
There are many factors concerning the appropriate
tyre pressure for a particular tyre and load. For
example, the tyre size, rim type, tyre status (driven
or free rolling), load, speed, haul length and ply rating
all need to be considered when determining the tyre
pressure.
NOTE:
If a tyre is replaced with a different brand
or size, please contact the supplier for correct air
pressures to suit the load carrying capacity of this
machine.
For further information on wheels and tyres please
refer to Chapter 10 ‘Lubrication & Maintenance’.
Summary of Contents for Super Cruiser G8
