Goldacres Super Cruiser G8, Operator'S Manual, Page: 56 / 210

52 - Chapter 4 - Cabin G8 Super Cruiser Operator’s Manual MY19 - REV 0
Preferred Screen Storage
GEM automatically stores the current screen as a
user’s preferred page, after a delay of approximately
15 seconds (if no buttons are pushed). On next
power-up the display will start with the splash screen,
and then go to the last stored screen.
NOTE: selecting Restore Defaults on the Systems
sub-menu of Configuration will set the main engine
screen as the default display.
Key Pad Lock
GEM’s five keys can be locked, such that an operator
cannot change any settings or access any other
display mode - in a similar manner to the key lock
functions on a mobile phone. This is achieved by
pressing and holding keys 1 and 5 simultaneously for
four seconds. Repeating this operation resets GEM/
CANtrak back to normal operation.
Maintenance & Troubleshooting
No regular maintenance is required, except for
cleaning the GEM lens as required using a soft, damp
cloth. Do not use abrasive materials or solvents.
Should any further attention be necessary, please
contact your supplier.
CANtrak System - Configuration
GEM Diagnostics