![background image](http://html1.mh-extra.com/html/gmc/c-series-1993/c-series-1993_repair-manual_2235927092.webp)
REAR AXLE CONTROLS 4B2*5
Tighten
• Nut to 15.5 N m (135 in. lbs.).
8. Piston stop (4).
9. Push rod, spring, and piston into the cylinder.
• Use a 9/16 inch socket on the piston nut.
• Use a puller to compress the spring.
10. Clevis pin (9) at the push rod and actuator arm
joint.
11. Housing cover gasket (15).
12. Housing cover (14).
13. Cover screws (12) and washers (13).
[ & l Tighten
• Screws to 11.5 N m (100 in. lbs.).
14. Cylinder cover seal (24).
15. Cylinder cover (25).
16. Cylinder cover bolts (5) and nuts (26);
| ^ | Tighten
• Nuts to 14.0 N-m (120 in. lbs.).
17. Filler plug (11).
The oil will be put in after the shift unit is installed on
the axle.
Summary of Contents for C Series 1993
