![background image](http://html1.mh-extra.com/html/gmc/c-series-1993/c-series-1993_repair-manual_2235927054.webp)
3B1A-12 POWER STEERING GEAR UNIT REPAIR
STEERING GEAR CONNECTORS
Figure 1 a n d 2 9
Tool Required:
J 6217 Valve Connector Seat Installer
Important
•
Do not perform the follow ing procedure
with the valve assembly installed in the gear
housing.
z °
Inspect
BraSs inverted flare connectors (51) for
looseness..
4 - 4
Remove or Disconnect
•
Flaire connectors (51), if necessary, and
disqard. A modified No. 4 screw extractor
may be used to remove the connectors.
4 4
-
Install or Connect
1.
N ew flare connectors (51).
•
Drive connector seats in place using tool
J 6217 (see Figure 29).
PITMAN SHAFT BEARING AND
SEAL REPLACEMENT
Figure 30
Tools Required:
;
J 4245 Internal Snap Ring Pliers
, | : J 24655 Bearing Installer and Remover
J 8092 Handle
NOTICE:
When removing seals, be careful not to score the
housing bore or leakage may result.
,
Disassemble
1.
Retaining ring (42). Use tool J 4245.
2.
Dust seal (41). Pry with a screwdri ver.
3.
Washer (43).
4.
Seal (44), using a screwdriver.
5.
Bearing (45), if necessary, Use tools J 24655 and
J 8092 (see Figure 30).
Summary of Contents for C Series 1993
