![background image](http://html1.mh-extra.com/html/gmc/c-series-1993/c-series-1993_repair-manual_2235927021.webp)
HR6-HE AIR CONDITIONING COMPRESSOR 1D2-1
SECTION 1D2
HR6-HE AIR CONDITIONING
COMPRESSOR
NOTICE:
When fasteners are removed, always reinstall them at the same locahon from which they were removed. If a
fastener needs to be replaced, use the correct part number fastener for that application. If the correct part number fastener is nojf
available, a fastener of equal size and strength (or stronger) may be used. Fasteners, that are not reused, and those requiring thread
locking compound will be called out; The correct torque value must be used when installing fasteners that require it. If the above
conditions are not followed, parts or system damage could result.
CONTENTS
General Description . , ........ ..1D2-1
Major HR6-HE Compressor
Metric Thread Size Information ........ ............ ., . , 1D2-3
Repair Procedures................. . ;
............... . . , . . 1D2-8
Unit' Repair
:
. 1D2-3 :
Compressor Shaft Seal Replacement ..............1 D 2 -8
Minor HR6-HE Compressor
Leak, Detection
. . . . . . .
................... ...... ID2-8
Repair Procedures............................... .............. . . ID2-3 .
Compressor Pressure Relief Valve ................. . ID2-10
Compressor Clutch Plate and
'
Control Switches
;
;
. 1D2-U
Hub Assembly, . . . . . . . . . . . . . .-.. . . s . .. . . . . 1D2-3
• Compressor Leak Testing .. . . . . . . . . ; ........ .. ID2-11
Compressor Clutch Rotor and/or B e a r i n g . I D 2 - 4
Bench-Check Procedures . . . . . . . . . . . . . . . lD 2 -ll
Compressor Clutch Coil . . . . . . . ... . . ' ' . . . ; . . 1D2-7-
Special Tools , i ........... ... . . .
. . ...
.... 1D2-12
GENERAL DESC RIPTIO N
The HR6-HE Automotive Conditioning Compressor ;
and Clutch Assembly is a lightweight; six cylinder axial design
consisting of three double ended pistons and weighs 5.8 kg
(12.7 lbs.)
,
T
Although the HR6-HE compressor is the same Tor all
vehicle applications, there are. differences in installations,
mounting brackets, pulleys, torque cushions'and. switches;
none of which will affect the following overhaul procedures. .
, There are two clutch-driver designs for the HR6-HE
compressor. The clutch driver, without.a torque cushion and the
clutch driver having a thin torque cushion (Fig. !). V V
v 5
Service.compressors are supplied with either the control
switches assembled in,the rear head or a; plug may be found
where a control switch is required. If the service, compressor
.requires control switches, the plug may be removed from the
appropriate rear head switch cavity of the replaced compressor
and assembled as prescribed in this manual.
When servicing the compressor, keep dirt or foreign
material from getting on or into the compressor parts and
system. Clean tools and a clean work area are important for
proper service.The compressor connections and the outside of
the compressor should be cleaned before any “oh vehicle”
repairs, or before removal of the compressor. Jhe.'parts, must be
kept clean at all times and ctny.pafts to be reassembled should
be cleaned with trichlorOethane, naphtha,; Stoddard solvent,
kerosene or equivalent and dried with dry air. When necessary
to use a cloth on any part, it should be of a non-lint producing
type, ' '
'
'
VV
The operations described below are based on bench
overhaul with the compressor removed from the vehicle,
except as noted. They have been prepared in order of
.accessibility of the . components. When a Compressor is
removed from the vehicle for servicing, the amount pf oil
remaining iri the compressor should be. drained, measured
Summary of Contents for C Series 1993
