![background image](http://html1.mh-extra.com/html/gmc/1989-light-duty-truck/1989-light-duty-truck_repair-manual_2235153743.webp)
700-R4 AUTOMATIC TRANSMISSION 7A1-47
*
Porosity
Cracks
Interconnected Oil Passages
Dam aged M achined Surfaces
Assemble (Figures 113,114)
•
Control valve assembly (67) exactly as shown.
N otice the position o f the valve lands and bushing
passages.
|-»4-| Install or Connect (Figures 115,117)
1.
Three checkballs (5 5A ), (55C) and (91) into the
valve body assembly. Checkball (91) is the larger
copper colored ball shown as # 10 on Figure 115.
retain with petrolatum.
2.
Valve body assembly (67)
connect the manual valve link (705) to the
inside detent lever (703).
Auxiliary Accumulator Valve Body Assembly
jjjl
Clean (Figure 116)
❖
1.
2
.
3.
4.
*
1?
Auxiliary valve assembly (377) thoroughly in
clean solvent
move the valves with a pick or small
screwdriver to dislodge any dirt or debris
that may have accum ulated
Air dry
Disassemble (Figure 116)
(3) Bolts (373)
Cover (371) is under spring pressure
Cover (371) and accum ulator piston spring (370)
Piston (367)
Piston oil seal ring (53)
Disassemble (Figure 116)
Position the auxiliary accum ulator valve body on
a clean surface.t R em ove valve trains beginning
with the lower left hand corner. NOTE; valves
are under pressure-cover bores while removing
the roll pin.
Valves and springs must be laid out on a clean
surface in the exact sequence as they are remvoed
Clean
A ll valves and springs in clean solvent
Air dry
Inspect
Piston (367) for:
cracks
porosity
damage
Valves for:
scoring
nicks
scratches
Springs for damaged or distorted coils
•
A uxiliary valve body (377) for:
porosity
damaged machined surfaces
•
Orifice cup plug (359)
remove only if damaged
<--►1 Remove or Disconnect
T ools Required
# 3 Screw Extractor
•
Orifice cup plug (359). U se modified # 3 screw
extractor.
*
*
1.
2
.
3.
4.
+4-
1.
2
.
3.
4.
5.
1.
2
.
3.
4.
Install or Connect
T ools Required
9.5
mm (3 /8 " ) Rod
Orifice cup plug (359). U se 9.5 mm (3 /8 " ) rod.
seat flush
Assemble (Figure 116)
Auxiliary accum ulator valve train exactly as
shown. N otice the valve lands
Assemble (Figure 116)
Piston oil seal ring (369) onto piston (367)
lubricate with petrolatum
Piston (367)
A ccum ulator spring (370)
Cover (371) and (3) bolts (373)
Install or Connect (Figures 116,119 and 120)
Check ball (55B ) into auxiliary accum ulator
valve body (377) as shown in Figure 115.
do not block orifice cup plug
retain with petrolatum
Auxiliary valve body (377)
Bolts (374) and (375) finger tight
Auxiliary accum ulator valve tube (96)
Bolt (376) with tube clamp (97)
torque bolts to 11 N -m (8 lbs.-ft.)
Inspect (Figure 109)
The throttle lever and bracket assembly (65) for
sticking, binding or damage
Make sure it operates freely without restrictions
Replace if necessary
Install or Connect (Figures 118,119 and 120)
T.V. link (64) onto the T.V. lever and bracket as
shown
T.V. lever and bracket assembly (65) onto the
valve body as shown
attach with two valve body to case bolts
(69).
Wire harness clips (66), manual spring assembly
(68), wire retaining washer, and all remaining
valve body to case bolts (69)
Torque to 11.0 N -m (8 lbs.-ft.).
“0 ”ring seal (34) onto the electrical connector
(33)
J
Summary of Contents for 1989 Light Duty Truck
