![background image](http://html1.mh-extra.com/html/gmc/1989-light-duty-truck/1989-light-duty-truck_repair-manual_2235153635.webp)
MODEL 700 THROTTLE BODY 6C4-3
DESCRIPTION
The fuel control system has an e le c tric fuel pum p,
located in the fuel tank on the gage sending unit, which
pumps fuel to the TBI through the fuel supply line, then
through an in-line fuel filter. The pump is designed to pro
vide pressurized fuel at about 125 kPa (18 psi).
A pressure regulator in the TBI keeps fuel available to the
injectors at a constant pressure between 62 and 90 kpa (9
and 13 psi). Fuel in excess of injector needs is returned to
the fuel tank by a separate line.
The ECM controls the injectors that are located in the fuel
meter body assem bly of the TBI. The injectors deliver fuel in
one of several modes.
In order to properly control the fuel supply, the fuel pump
is operated by the ECM through the fuel pump relay and oil
pressure switch.
MODEL 700 TBI UNIT
Model 700, used on the L4 engine, is made up of two
major casting assemblies:
• Fuel m eter assem bly with:
— Pressure regulator
— Fuel injector
• Throttle body with:
— Idle air control (IAC)
— Throttle position sensor (TPS)
THROTTLE BODY DISASSEMBLY
FUEL INJECTOR ASSEMBLY
The fuel injector (refer to Figure 3) is serviced only as a
complete assembly.
NO TIC E: Use care in re m o v in g in je c to r, to p re
vent d am ag e to the e le c tric a l c o n n e c to r on top o f
the in jecto r, a n d nozzle. A lso, b ec a u s e the fu e l
in je c to r is an e le c tric a l c o m p o n e n t, it s h o u ld n o t
b e im m e rs e d in an y ty p e o f liq u id s o lv e n t o r
clean er, as d am ag e m ay occur.
Remove or Disconnect (Figure 6)
□
Remove or Disconnect (Figures 3 through 5)
1. Electrical connector to fuel injector.
2. Injector retainer screw and retainer.
• Using a fulcrum , place a screw driver blade under
ridge opposite connector end and carefully pry injec
tor out (refer to figure 4).
3.
Upper and lower O-rings from injector and in fuel
injector cavity and discard.
I ? Inspect
• Fuel injector filter for evidence of dirt and contam ina
tion. If present, check for presence of dirt in fuel lines
and fuel tank.
Important
Be sure to replace the injector with an identical part.
Injectors from other models can fit in the Model 700
TBI, but are calibrated for different flow rates. (Refer
to figure 5 for part num ber location.)
PRESSURE REGULATOR
ASSEMBLY
NO TIC E: To p re v e n t leaks, th e p ressu re re g u la to r
diap h rag m assem bly m u s t b e re p la c e d w h e n e v e r
the c o v e r is rem oved.
1. Four pressure re g u la to r atta ching screw s, w hile
keeping pressure regulator com pressed.
CAUTION: The pressure regulator contains a
large spring under heavy com pression. Use care
when removing the screws to prevent personal
injury.
1. Screw Assem bly
2. Retainer
3. Fuel M eter A ssem bly
4. Lower “ O ” Ring
5. Upper “ O ” Ring
6. Injector
F-6750
Figure 3 — M odel 7 00 Fuel In je c tio n Parts
Summary of Contents for 1989 Light Duty Truck
