GE UR T60, Instruction Manual

Page: 629 / 724

GE Multilin T60 Transformer Protection System B-91
APPENDIX B B.4 MEMORY MAPPING
B
F530
ENUMERATION: FRONT PANEL INTERFACE KEYPRESS
F531
ENUMERATION: LANGUAGE
0 = English, 1 = French, 2 = Chinese, 3 = Russian
F540
ENUMERATION: PMU POST-FILTER
0 = None, 1 = Symm-3-Point, 2 = Symm-5-Point,
3 = Symm-7-Point, 4 = Class M, 5 = Class P
F542
ENUMERATION: PMU TRIGGERING MODE
0 = Automatic Overwrite, 1 = Protected
F543
ENUMERATION: PMU PHASORS
F544
ENUMERATION: PMU RECORDING/REPORTING RATE
F545
ENUMERATION: PMU COM PORT TYPE
0 = Network, 1 = RS485, 2 = Dir Comm Ch1, 3 = Dir Comm Ch2,
4 = GOOSE, 5 = None
F546
ENUMERATION: PMU REPORTING STYLE
0 = Polar, 1 = Rectangular
F547
ENUMERATION: PMU REPORTING FORMAT
0 = Integer, 1 = Floating
F550
ENUMERATION: RTD INPUT APPLICATION
F552
ENUMERATION: RTD INPUT OPEN
F600
UR_UINT16: FLEXANALOG PARAMETER
Corresponds to the Modbus address of the value used when this
parameter is selected. Only certain values can be used as FlexAn-
alogs (basically all metering quantities used in protection).
Value Keypress Value Keypress Value Keypress
0 None 15 3 33 User PB 3
1 Menu 16 Enter 34 User PB 4
2 Message Up 17 Message
Down
35 User PB 5
3 7
~
18 0
~
36 User PB 6
4 8 19 Decimal 37 User PB 7
5 9 20 +/– 38 User PB 8
6 Help 21 Value Up 39 User PB 9
7 Message Left 22 Value Down 40 User PB 10
8 4 23 Reset 41 User PB 11
9 5 24 User 1 42 User PB 12
10 6 25 User 2 44 User 4
11 Escape 26 User 3 45 User 5
12 Message
Right
31 User PB 1 46 User 6
13 1 32 User PB 2 47 User 7
14 2
Value Phasor Value Phasor
0 Off 8 Ig
1 Va 9 V1
2 Vb 10 V2
3 Vc 11 V0
4 Vx 12 I1
5 Ia 13 I2
6 Ib 14 I0
7 Ic
Value Rate Value Rate
0 1/second 6 15/second
1 2/second 7 20/second
2 4/second 8 25/second
3 5/second 9 30/second
4 10/second 10 50/second
5 12/second 11 60/second
Enumeration RTD input application
0 None
1 Stator
2 Bearing
3 Ambient
4 Group 1
5 Group 2
Enumeration RTD open
0 None
1 Alarm
2 Block