GE AKTApure, User Manual, Page: 491 / 522

9.11 Available Curves
The table below lists all available Curves for ÄKTA pure.
Description Sampling
frequency Range Curve
The first UV/Vis absorbance signal
of the U9-M monitor. 10 Hz -6000.000 – 6000.000 mAU UV 1
The 2nd UV/Vis absorbance signal
of the U9-M monitor. 2 Hz -6000.000 – 6000.000 mAU UV 2
The 3rd UV/Vis absorbance signal
of the U9-M monitor. 2 Hz -6000.000 – 6000.000 mAU UV 3
The conductivity signal. 5 Hz 0.00 – 999.99 mS/cm Cond
The conductivity signal as a percent-
age of a set range. 1 Hz 0.0 – 100.0 % % Cond
The set concentration B or the cur-
rent value during a gradient. 1 Hz 0.0 – 100.0 % Conc B
The set flow rate of the system
pumps. 1 Hz 0.001 – 50.000 ml/min (ÄKTA
pure 25) System flow
0.01 – 300.00 ml/min (ÄKTA
pure 150)
The set flow velocity of the system
pumps. Only available if a column
is selected. 1 Hz cm/h System linear
flow
The set flow rate of the sample
pump. 1 Hz 0.001 – 50.000 ml/min (ÄKTA
pure 25) Sample flow
0.01 – 300.00 ml/min (ÄKTA
pure 150)
The set flow velocity of the sample
pump. Only available if a column is
selected. 1 Hz cm/h Sample linear
flow
The pre-column pressure signal. 1 Hz -1.00 – 20.00 MPa (ÄKTA
pure 25) PreC pressure
-1.00 – 5.00 MPa (ÄKTA pure
150)
The delta-column pressure signal. 1 Hz -1.00 – 20.00 MPa (ÄKTA
pure 25) DeltaC pressure
-1.00 – 5.00 MPa (ÄKTA pure
150)
ÄKTA pure User Manual 29119969 AB 491
9 Reference information
9.11 Available Curves