GE AKTApure, User Manual, Page: 483 / 522

9.9.8 Manual instructions - Watch parameters
The table below describes the watch parameter instructions available for ÄKTA pure.
Description Instruction name
Watch UV parameters sets the accepted signal fluctuation and
Delta peak limit of the UV signal for some of the tests in the Watch
and Hold until instructions. Watch UV parameters
Watch UV 2nd parameters sets the accepted signal fluctuation
and Delta peak limit of the UV 2nd signal for some of the tests in
the Watch and Hold until instructions. Watch UV 2nd parameters
Watch cond parameters sets the accepted fluctuation and Delta
peak limit of the conductivity signal for some of the tests in the
Watch and Hold until instructions. Watch cond parameters
Watch pH parameters sets the value for the accepted fluctuation
of the pH signal used for the test Stable signal in the instructions
Watch and Hold until. Watch pH parameters
Watch flow parameters sets the value for the accepted fluctua-
tion of the flow rate signal used for the test Stable signal in the
instructions Watch and Hold until with signal System flow. Watch flow parameters
Watch pressure parameters sets the value for the accepted
fluctuation of the pressure signals used for the test Stable signal
in the instructions Watch and Hold until. Watch pressure parameters
Watch analog in parameters sets the accepted signal fluctuation
and Delta peak limit of the analog signal for some of the tests in
the Watch and Hold until instructions. Watch analog in parameters
ÄKTA pure User Manual 29119969 AB 483
9 Reference information
9.9 Manual instructions
9.9.8 Manual instructions - Watch parameters